Stainless Steel Reduced Head Knurled Body Rivet Nut
Rivet Nuts (Insert Nuts)

Stainless Steel Reduced Head Knurled Body Rivet Nut, Open & Closed End

Reduced (thin) head, round knurled body, open or closed end. M3 to M12, stainless steel SS 304.

Section
Rivet nuts
Type
Stainless steel rivet nuts
Request a quote All rivet nuts

Overview

A rivet nut (insert nut) gives a strong, reusable thread in sheet metal, tube or plastic that is too thin to tap. It is fitted from one side with a hand or pneumatic tool. The thin reduced head sits almost flush with the panel, for a neat finish. Knurls on the body bite into a round hole to resist spinning. Also made with a closed end: the closed end seals the thread against water, dust and paint, and protects parts behind the panel. Pick the end in the size list.

The open end lets a longer screw pass right through. Available from M3 to M12 with grip ranges from 0.5 mm to 6.5 mm. Each part number covers a set range of sheet thickness and has its own overall length (L), shown in the table.

Specifications

BrandSGPFS
Part no. seriesSGRK034OE… (open end), SGRK034CE… (closed end)
ThreadsM3, M4, M5, M6, M8, M10, M10(12H), M12, M12(16H)
Grip range0.5 mm to 6.5 mm
Length (L)9 mm to 27 mm (open end); 14 mm to 43 mm (closed end, L1)
HeadReduced (thin) head
BodyRound knurled body
EndOpen end, or closed end (blind, sealed)
MaterialStainless steel SS 304. Same can be manufactured in SS 316 against orders

Sizes & part numbers

All dimensions in mm. One row per grip range. The 2D drawing shows where each letter is measured.

Open end

Part no.ThreadMaterialGrip range
min–max		Hole size
+0.1 / 0		Body D
+0.07 / −0.10		Head BHead KLength L
±0.30
SGRK034OEM390515M3S0.5–1.55.04.96.00.69.0
SGRK034OEM3101525S1.5–2.55.04.96.00.610.0
SGRK034OEM4110520M4S0.5–2.06.05.97.00.611.0
SGRK034OEM4132035S2.0–3.56.05.97.00.613.0
SGRK034OEM51150520M5S0.5–2.07.06.98.00.611.5
SGRK034OEM5132035S2.0–3.57.06.98.00.613.0
SGRK034OEM6140525M6S0.5–2.59.08.910.00.714.0
SGRK034OEM6172545S2.5–4.59.08.910.00.717.0
SGRK034OEM81651035M8S1.0–3.511.010.912.00.716.5
SGRK034OEM81853555S3.5–5.511.010.912.00.718.5
SGRK034OEM101951035M10S1.0–3.513.012.914.00.819.5
SGRK034OEM10223560S3.5–6.013.012.914.00.822.0
SGRK034OEM10H12191035M10 (hole 12)S1.0–3.512.011.913.00.819.0
SGRK034OEM12221040M12S1.0–4.015.014.916.01.022.0
SGRK034OEM12254065S4.0–6.515.014.916.01.025.0
SGRK034OEM12H162421040M12 (hole 16)S1.0–4.016.015.917.51.024.2
SGRK034OEM12H16274065S4.0–6.516.015.917.51.027.0

Closed end (blind)

Part no.ThreadMaterialGrip range
min–max		Hole size
+0.1 / 0		Body D
+0.07 / −0.10		Head BHead KLength L1
±0.30
SGRK034CEM3140515M3S0.5–1.55.04.96.00.614.0
SGRK034CEM3151525S1.5–2.55.04.96.00.615.0
SGRK034CEM4150520M4S0.5–2.06.05.97.00.615.0
SGRK034CEM41652035S2.0–3.56.05.97.00.616.5
SGRK034CEM51650520M5S0.5–2.07.06.98.00.616.5
SGRK034CEM5182035S2.0–3.57.06.98.00.618.0
SGRK034CEM62050525M6S0.5–2.59.08.910.00.720.5
SGRK034CEM6222545S2.5–4.59.08.910.00.722.0
SGRK034CEM8231035M8S1.0–3.511.010.912.00.723.0
SGRK034CEM82453555S3.5–5.511.010.912.00.724.5
SGRK034CEM102451035M10S1.0–3.513.012.914.00.824.5
SGRK034CEM10283560S3.5–6.013.012.914.00.828.0
SGRK034CEM10H122451035M10 (hole 12)S1.0–3.512.011.913.00.824.5
SGRK034CEM12381040M12S1.0–4.015.014.916.01.038.0
SGRK034CEM12414065S4.0–6.515.014.916.01.041.0
SGRK034CEM12H16401040M12 (hole 16)S1.0–4.016.015.917.51.040.0
SGRK034CEM12H16434065S4.0–6.516.015.917.51.043.0

Material: S = Stainless steel SS 304 (SS 304). Same can be manufactured in SS 316 against orders. Part number = SG + type + grade (01 carbon steel, 02 aluminium, 034 stainless steel SS 304) + end (OE open, CE closed) + thread + length + grip range. Example: SGFK01OEM6150525 = flat head knurled, carbon steel, open end, M6, length 15, grip 0.5–2.5 mm.

How it works

A rivet nut gives a strong, reusable thread in sheet metal, tube or plastic that is too thin to tap, and it is fitted from one side only. Here is how this nut goes in.

1 Make the holeDrill or punch a round hole tothe size in the table. Noaccess to the back is needed.2 Insert the nutPush the nut in until the headsits on the sheet.3 Set itThe tool pulls the thread up:the thin wall behind the sheetfolds into a tight collar andclamps.4 FastenScrew in the bolt to fix thepart. The thread can be usedagain and again.
Installation in four steps (simplified illustration).

Knurled round body

The fine knurls bite into the wall of a round hole, so the nut resists spinning when the bolt is tightened. Round holes are the easiest to drill.

thin sheetthick sheet

Choosing the grip

Each part number sets in a range of sheet thickness (the grip). Pick the part whose grip covers your sheet: too thin and the collar will not clamp, too thick and the nut cannot fold. The hole size is in the table.

Open or closed end

Open end: the thread runs right through, so a longer bolt can pass. Closed end: the end is sealed, keeping water, dust and paint out of the thread and protecting parts behind the panel. Pick the end in the size list above.

Head

Reduced head: a thin, small head that stands only a fraction of a millimetre above the surface.

Setting tools

Set with a hand, pneumatic-hydraulic or battery tool fitted with the matching mandrel. See our riveting tools.

Key features

  • Strong thread in thin sheet
  • One-sided installation
  • Through thread

Applications

Electrical panels and enclosuresAutomotiveFurnitureSolar structures
Need a size, grade or finish not listed?We also supply special and non-standard parts to drawing.Send enquiry

More rivet nuts