Self-Clinching & Weld Fasteners

Hole Slide Lock Standoffs

Keyhole-mount standoffs that slide and lock a board in place.

Section: Self-clinching
Type: Standoffs

Overview

Hole slide lock standoffs work with a keyhole slot in the board: the board slides over the head and locks in place, allowing quick fitting and removal.

Full dimensions, preferred lengths and installation / push-out / torque-out performance data are in the tables below, taken from the self-clinching fasteners catalogue.

Specifications

Part numbers	SG-SKC
Stainless Steel	SG-SKC
Sheet hardness (SG-SKC)	HRB 70 or less

Dimensions & performance data

All dimensions in mm unless stated. Values from the self-clinching fasteners catalogue. Install into sheet within the hardness limits shown in the specifications.

Dimensions (mm)

Body size - sheet code	61.5
A max.	5.39
B ±0.08	4.5
C max.	2.75
D nom.	6.35
G ±0.08	1.73
Recommended hole size +0.08	5.5

Lengths L ±0.13 (mm)

Length code L	2	4	6	8	10	12	14	16	18	20	22	25

Performance data: SG-SKC (test sheet thickness 1.52 mm)

Body sheet code	Installation (kN), steel	Pushout (N), steel	Installation (kN), 5052-H34 aluminium	Pushout (N), 5052-H34 aluminium
61.5	14.3	2650	7.0	1100

Mounting: panel 1 (metal, HRB 50) and panel 2 (PC board or metal)

Part no.	SG-SKC
Panel 1: bottom mounting hole +0.08	5.4
Panel 1: max. hardness	HRB 70
Panel 1: min. thickness	1.0
Panel 1: min. distance to edge of sheet	6.6
Panel 1: max. location tolerance	±0.13
Panel 2: top mounting hole A1 nom.	1.5
Panel 2: top mounting hole A2 ±0.08	3.0
Panel 2: top mounting hole A3 ±0.08	5.0
Panel 2: top mounting hole A4 min.	3.75
Panel 2: thickness range	1.45-1.62
Panel 2: min. distance to edge of sheet	4.1